Where a standard folding machine is optimised for speed at small pleat heights, the XD-AUTO-1000 is built around the structural demands of a 300mm pleat: a wider working width, a larger machine footprint, and higher pre-heating power to shape the deeper fold. Motor power is 12kW and pre-heating power is 14kW, with a temperature range of 0–250°C.
The equipment consists of two units that run as one line: an unwinding unit that feeds filter paper into the process, and a knife pleating unit that cuts, folds and pre-heats the paper into pleated media. The complete machine measures 4300 × 2500 × 2300mm and weighs 1500kg.
Working width is up to 950mm. Pleat height ranges from 20mm to 300mm. Production speed ranges from 30 to 50 pleats per minute. The machine folds filter paper into M-type, W-type and T-type configurations, with the folding distance set through the computer.
Cutting size is adjusted through inverter stepless speed regulation combined with a pneumatic cutting knife, and the cutting process is controlled by an infrared monitoring system. The Automatic Paper Folding Machine with 300 Folding Height uses an alternating upper and lower knife method, with the folding distance automatically adjusted by the computer to match different pleat heights. The folding knife angle can be changed arbitrarily, which prevents damage to the filter paper material during folding.
Filter paper completes automatic dot counting, folding processing and pre-heating shaping on the folding machine. Pre-heating power is 14kW, with a temperature control range of 0–250°C.
| Specification | Value |
| Item No. | XD-AUTO-1000 |
| Working Width | ≤950mm |
| Pleat Height | 20–300mm |
| Production Speed | 30–50 pleats/min |
| Power / Voltage | 380V / 50Hz |
| Air Pressure | 0.6MPa |
| Motor Power | 12kW |
| Pre-heating Power | 14kW |
| Temperature Range | 0–250°C |
| Machine Dimensions | 4300 × 2500 × 2300mm |
| Weight | 1500kg |
The machine folds filter paper into M-type, W-type and T-type configurations. Pleat height is set through the computer within the 20–300mm range, so the same machine covers filter elements from medium to deep pleat specifications without mechanical changeover of the folding mechanism.
The 20–300mm pleat height range is the defining specification of this machine. It is designed for filter elements that need a deep fold, where the structural challenge is shaping and holding a 300mm pleat rather than running at high speed. Pre-heating power is 14kW, which is sized to shape the deeper fold rather than to match a high-speed line.
Working width up to 950mm accommodates wider filter paper and larger filter element formats. Combined with the 20–300mm pleat height range, the machine covers large-format filter elements that narrower machines cannot fold in a single pass.
The folding distance is set through the computer and automatically adjusted to match different pleat heights. Changing from one filter element specification to another does not require mechanical changeover of the folding mechanism.
The Automatic Paper Folding Machine with 300 Folding Height uses an alternating upper and lower knife method to complete the folding work, with accurate size and smoothness across the pleated media. The folding knife angle can be changed arbitrarily, which prevents damage to the filter paper material during folding.
Cutting size is adjusted through inverter stepless speed regulation combined with a pneumatic cutting knife. The cutting process is controlled by an infrared monitoring system, with smooth cutting effect across different filter element specifications.
Filter paper completes automatic dot counting, folding processing and pre-heating shaping on the folding machine. The pleat count is controlled by the machine rather than counted manually, and the pre-heated media leaves the line in its formed shape.
The machine covers a pleat height range of 20mm to 300mm. This is the defining specification of the model — it is built for deep pleats, not for high pleat counts at small pleat heights.
Production speed is 30–50 pleats per minute, which is lower than a high-speed narrow-pleat machine. The trade-off is the pleat height range: 20–300mm versus the smaller pleat heights a high-speed machine is limited to. The machine is specified when the filter element requires a deep pleat rather than a high output rate.
The machine folds filter paper into M-type, W-type and T-type configurations. Working width is up to 950mm, and pleat height is set through the computer within the 20–300mm range.
The folding knife angle can be changed arbitrarily, which prevents damage to the filter paper material during folding. The folding machine uses an alternating upper and lower knife method with accurate size and smoothness.
Yes. Filter paper completes automatic dot counting, folding processing and pre-heating shaping on the folding machine. Pre-heating power is 14kW with a temperature control range of 0–250°C.
The Automatic Paper Folding Machine with 300 Folding Height requires 380V / 50Hz power. Motor power is 12kW and pre-heating power is 14kW. Air pressure requirement is 0.6MPa.
The complete machine measures 4300 × 2500 × 2300mm and weighs 1500kg. The footprint is larger than a narrow-pleat machine because of the 950mm working width and the 300mm maximum pleat height.
Pleat height, working width and pleating type are confirmed against the filter element specification before the order. Send the filter element dimensions, filter paper type and target pleat height, and we will confirm the machine configuration.
Send the filter element specifications (pleat height within the 20–300mm range, working width within 950mm, filter paper type) and target production output. We will confirm the configuration and quotation based on those requirements.
Address
Hongchuangyuan, Dongshan Street, Rui'an City, Wenzhou, Zhejiang Province, China
Tel
